Die-Cut Fluorozone Gaskets for High Heat and Industrial Fluids
Interstate Specialty Products die cuts Fluorozone, a premium-performance FKM fluoroelastomer with a temperature range of -20° F to 400° F. With its high fluorine content (66%), Fluorozone exhibits good resistance to many aliphatic hydrocarbon fluids. This fluoropolymer also resists a wide range of oils, fuels, and lubricants, and most mineral acids. Applications for die cut fluorozone include custom seals and gaskets.
Precision Die-Cutting for Fluorozone Gaskets
Using precision die cutting, Interstate converts rolls or sheets of Fluorozone into die cut gaskets in a range of sizes and with tight tolerances. Made in the USA by WARCO WILBRITE, Fluorozone is available in standard roll widths of 36” and 48”, and in molded sheet sizes of 36” x 36” and 48” x 48”. Roll thicknesses range from 1/64” to 1/4”, and molded sheets are up to 4” thick. Custom widths, thicknesses, and lengths are also available.
Advantages of Die-Cut Fluorozone Gaskets
Fluorozone FKM rubber sheets and slabs do not contain reground or recycled materials. Instead, they’re made of 100%-virgin 3M Dyneon fluoropolymer for long-term protection against high temperatures and corrosive chemicals. Fluorozone’s FKM designation indicates that this heat-resistant and fluid-resistant material is part of the fluoroelastomer category in the ASTM D1418 standard.
Material Properties of Fluorozone FKM Rubber Sheets and Rolls
Fluorozone complies with the requirements of RoHS, REACH, and California Prop 65. Fluorozone has a hardness of 75 durometer (Shore A), a typical tensile strength of 1250 psi, and a typical ultimate elongation of 300%.
Applications for Die-Cut Fluorozone Gaskets
In addition to die cut gaskets, industrial applications for Fluorozone FKM rubber sheets include hydraulic O-ring seals, diaphragms, electrical connectors, flue duct expansion joints, and liners. Applications can also include valve and manifold gaskets, valve stem seals, and fuel injector O-rings. In the aerospace industry, Flurozone FKM rubber sheets can be used to create manifold gaskets, firewall seals, and O-ring seals used in fuel, lubricant, and hydraulic systems.
Ask for Die-Cut Fluorozone Gaskets from Interstate
Is premium-performance Fluorozone FKM rubber right for your industrial application? Interstate Specialty Products die cuts fluorozone sheets and rolls and supplies custom gaskets that can withstand high heat and industrial fluids. To learn how we can support your sealing and insulation application, contact us on-line or call (800) 984-1811.
A 3rd generation leader of the business, Jaclyn takes pride in her pivotal role in driving the company’s strategic initiatives and operational excellence forward. She is passionate about building strong, collaborative relationships with clients and partners, ensuring that Interstate Specialty Products consistently meets and exceeds industry standards. She also enjoys mentoring emerging leaders and fostering a culture of continuous improvement within the organization.
NSF / ANSI Standard 61 establishes requirements for materials and products that come into contact with potable water systems. Developed by NSF International and adopted by the American National Standards Institute (ANSI), NSF / ANSI…
Poron foams are used for sealing, gasketing, sound dampening, vibration isolation, and shock absorption. Made by Rogers Corporation, these open-cell urethanes absorb energy and exhibit low outgassing and low compression set. Poron foam material is…
Interstate Specialty Products die cuts custom gaskets made of cast urethanes for applications that require resistance to abrasion, cracking, flexing, impact, tear, and heavy loads. Examples of these strong but versatile materials include cast urethane…
Die-Cut Fluorozone Gaskets for High Heat and Industrial Fluids
Precision Die-Cutting for Fluorozone Gaskets
Using precision die cutting, Interstate converts rolls or sheets of Fluorozone into die cut gaskets in a range of sizes and with tight tolerances. Made in the USA by WARCO WILBRITE, Fluorozone is available in standard roll widths of 36” and 48”, and in molded sheet sizes of 36” x 36” and 48” x 48”. Roll thicknesses range from 1/64” to 1/4”, and molded sheets are up to 4” thick. Custom widths, thicknesses, and lengths are also available.
Advantages of Die-Cut Fluorozone Gaskets
Fluorozone FKM rubber sheets and slabs do not contain reground or recycled materials. Instead, they’re made of 100%-virgin 3M Dyneon fluoropolymer for long-term protection against high temperatures and corrosive chemicals. Fluorozone’s FKM designation indicates that this heat-resistant and fluid-resistant material is part of the fluoroelastomer category in the ASTM D1418 standard.
Material Properties of Fluorozone FKM Rubber Sheets and Rolls
Fluorozone complies with the requirements of RoHS, REACH, and California Prop 65. Fluorozone has a hardness of 75 durometer (Shore A), a typical tensile strength of 1250 psi, and a typical ultimate elongation of 300%.
Applications for Die-Cut Fluorozone Gaskets
In addition to die cut gaskets, industrial applications for Fluorozone FKM rubber sheets include hydraulic O-ring seals, diaphragms, electrical connectors, flue duct expansion joints, and liners. Applications can also include valve and manifold gaskets, valve stem seals, and fuel injector O-rings. In the aerospace industry, Flurozone FKM rubber sheets can be used to create manifold gaskets, firewall seals, and O-ring seals used in fuel, lubricant, and hydraulic systems.
Ask for Die-Cut Fluorozone Gaskets from Interstate
Is premium-performance Fluorozone FKM rubber right for your industrial application? Interstate Specialty Products die cuts fluorozone sheets and rolls and supplies custom gaskets that can withstand high heat and industrial fluids. To learn how we can support your sealing and insulation application, contact us on-line or call (800) 984-1811.
Jaclyn Skagerlind
Vice President
A 3rd generation leader of the business, Jaclyn takes pride in her pivotal role in driving the company’s strategic initiatives and operational excellence forward. She is passionate about building strong, collaborative relationships with clients and partners, ensuring that Interstate Specialty Products consistently meets and exceeds industry standards. She also enjoys mentoring emerging leaders and fostering a culture of continuous improvement within the organization.
Share this article
Keep Reading
Want more? Here are some other blogs you might be interested in.
NSF / ANSI Standard 61 Compliant EPDM Gasket Material for Drinking Water Systems
NSF / ANSI Standard 61 establishes requirements for materials and products that come into contact with potable water systems. Developed by NSF International and adopted by the American National Standards Institute (ANSI), NSF / ANSI…
Read morePoron Foams for Seals, Gaskets, and Insulation
Poron foams are used for sealing, gasketing, sound dampening, vibration isolation, and shock absorption. Made by Rogers Corporation, these open-cell urethanes absorb energy and exhibit low outgassing and low compression set. Poron foam material is…
Read moreDie-Cut Urethane Gaskets for Harsh Environments
Interstate Specialty Products die cuts custom gaskets made of cast urethanes for applications that require resistance to abrasion, cracking, flexing, impact, tear, and heavy loads. Examples of these strong but versatile materials include cast urethane…
Read more