content_top

You are here

Silicone PDMS Membrane

content_middle

Polydimethylsiloxane (PDMS) is used as a barrier to liquids and a permeable path for gaseous elements and compounds. Applications include laboratory products and medical devices such as catheters, implants, valves, gaskets, and thin silicone films. Interstate Specialty Products supplies PDMS in sheets, and can die-cut PDMS sheets or continuous rolls into silicone membrane products.

Advantages of PDMS

Interstate Specialty Products sources translucent PDMS that is FDA CFR 177.2600 and USP Class VI compliant, odor free, and produced using a platinum cure catalyst system. Unlike peroxide-cured silicones, there’s no outgassing or catalyst byproduct with these ultra thin silicones. PDMS can be combined with other compounds to form composite materials, and exhibits distinctive rheological or flow properties.

PDMS is recommended for laboratory experiments and medical research that requires a gas permeable / liquid impermeable membrane. PDMS membranes are often used in gas sensing equipment and devices, and meet application requirements for a very thin silicone gasket or seal made from an FDA or USP grade material.

Thin Silicone Membranes for Gases

With many common gases, polydimethyl silicone membranes are more than 30 times more permeable than non-silicone stable polymers. These ultra thin silicones are supplied as sheets or continuous rolls with a thin release layer. Standard thicknesses range from .005” to .040” with a tolerance of plus or minus .002”.

Interstate has the following thicknesses available for quote- 0.005", 0.008", 0.010", 0.014", 0.017", 0.024", and 0.040". These materials are sold by the linear foot, with a 3' minimum combined purchase.

This table lists technical data with typical values. Custom thicknesses and durometers (Shore A) are available with minimum order quantities.

Data

Typical Values

Shore A

50

Tensile Elongation

1300 psi

Elongation (400 min)

570%

Specific Gravity

1.12 – 1.16

Tear B

200 ppi

Appearance

Translucent

Operating Temperature Range

-70° C (-95° F) to 200 °C (400°F)

This table provides gas permeability rates, applications, and PDMS membrane thicknesses.

Gas Permeability Rates*

Applications

Membrane Thickness

Style Number

Oxygen

50

Gas Analysis

0.003”

0.004”

SSPM823-005

Carbon Dioxide

270

Gas Detection

0.006”

0.008”

SSPM823-008

Nitrogen

25

Gas Enrichment

0.010”

0.012”

SSPM823- 010

Hydrogen

55

Gas Separation

0.014”

0.017”

SSPM823- 014

 

 

Cell Growth Support

0.024”

0.040”

SSPM823-024 and SSPM823-040

*In 10-9 (cc gas(RTP)cm)/(sec cm2 cmHg DP)

Platinum Cured Silicone Rolls

Platinum cured silicone rolls can be used in applications other than gas separation. They share the technical data from the first table above, and are available in thicknesses ranging from .005” to .188”. As continuous rolls, they can be slit to custom widths between 3 and 15 inches wide.

Interstate Specialty Products is ready to answer your questions about PDMS sheets, rolls, and membrane products. To learn how these ultra thin silicones can support your application, contact us on-line or call (800) 984-1811.